石俊秒
职称: 副教授 硕士生导师
地址：上海市梅陇路130号实验17楼
E-mail: shijunmiao@ecust.edu.cn
教育经历:
2014.09-2018.10 哈尔滨工业大学 材料加工工程专业 博士
2017.02-2018.02 日本大阪大学 接合科学研究所 联合培养
2012.09-2014.07 哈尔滨工业大学 材料加工工程专业 硕士
2008.08-2012.07 哈尔滨工业大学 焊接技术与工程专业 学士
工作经历:
2021.04-至今 华东理工大学77779193永利官网 副教授
2018.12-2021.04 西北工业大学材料学院 副教授
个人简介:
主要从事航空航天异质结构（连接结构、热障涂层）可靠性制造研究，近年来承担国家自然科学基金、中国博士后科学基金、省基金、重点研发任务、JKW项目任务、中航发及航天科工集团横向课题等，担任机械工程学会焊接分会堆焊及表面工程专委会委员、焊接分会青委会委员、材料分会青委会委员、焊接杂志社青年编委等，在Additive Manufacturing、Journal of the European Ceramic Society、Journal of Materials and Science and Technology等期刊发表论文50余篇。
研究方向
面向航空航天发动机高温极端服役环境的异质结构可靠性制造
1. 面向空天复杂结构的智能化焊接及喷涂技术
2. 基于表面加工的异质结构寿命提升方法
3. 基于多尺度方法的异质结构性能评定理论
招生专业：机械工程、动力工程及工程热物理、机械、能源动力
欢迎材料类、机械类同学加入团队攻读学位！
承担科研项目
1. 国家自然科学基金面上项目 2024-2027
2. 国家自然科学基金青年基金项目 2021-2023
3. 中国博士后科学基金第一批特别资助（站前）2019-2021
4. 中国博士后基金第68批面上资助 2020-2022
5. 陕西省自然基金青年基金 2020-2021
获奖成果
代表性著作
1. 发表论文
2024年：
1. Zheng Zhao, Junmiao Shi*, Wenhu Xu, Xiaolong Chen*, Kehan Yang, Fuqiang Tian, Xiancheng Zhang. Crack behaviour and failure mechanisms of air plasma sprayed (Gd,Yb) doped YSZ thermal barrier coatings under oxy-acetylene flame thermal shock. Ceramics International.
2023年：
1. Feng Jin, Junmiao Shi*, Guodong Wen*, Banglong Fu, Junjun Shen, Shiqing Wang, Yanbo Wu, Jiangtao Xiong, Jinglong Li. Frictional heat induced morphological responses at the interface in rotary friction welding of austenitic alloys: corona-bond and heat pattern. Journal of Materials Research and Technology, 2023, 23: 5972-5992.
2. Junmiao Shi, Jiatao Liu, Feng Jin*, Fuqiang Tian, Xianjun Sun. Diffusion bonding of FGH98 superalloy and DD5 single crystal using pure Ni interlayer. Materials Today Communications, 2023, 37: 107003.
3. Junmiao Shi, Hailong Guo, Feng Jin*, Xianjun Sun, Qian Wang*, Fuqiang Tian, Jinglong Li, Jin Yang, Ninshu Ma. Robust joining of FGH98 superalloy to DD5 single crystal by modulating interdiffusion behavior with Ni/high-entropy alloy hybrid interlayer. Science China Materials.
2022年：
1. Shiwei Li, Jinglong Li, Junmiao Shi*, et al. Microstructure and mechanical properties of transient liquid phase bonding DD5 single-crystal superalloy to CrCoNi-based medium-entropy alloy. Journal of Materials Science & Technology, 2022, 96: 140-150.
2. Fuqiang Tian, Junmiao Shi*, Feng Jin, Xianjun Sun, Jinglong Li, Xincheng Zhang. Microstructure and mechanical response of the DD5 single crystal and FGH98 superalloy joint diffusion bonded using Al0.3FeCoNiCr high entropy alloy interlayer. Materials Science and Engineering A, 2022, 854: 143784.
3. Fuquang Tian, Junmiao Shi*, Xuan Peng, Jinglong Li, Xiancheng Zhang. Reliable joining Al5(TiZrHfNb)95 multicomponent alloy and Nb using Ti–Ni filler metal. Vacuum, 2022, 201: 111083.
2021年：
1. Junmiao Shi, Qian Wang*, Fuqiang Tian, Lixia Zhang, Xiancheng Zhang. Reactive wetting and interfacial reaction mechanism of ZrC-SiC ceramic and Ag-Zr filler. Journal of the European Ceramic Society, 2021, 41:7464-7468.
2. S.W. Li, J.M. Shi*, J.T. Xiong, Y. Peng, J. Ren, F.S. Zhang, J.L. Li*. Microstructural characteristics and mechanical properties of WC-Co/steel joints diffusion bonded utilizing Ni interlayer. Ceramics International, 2021, 47: 4446-4454.
3. Y.J. Du, J.T. Xiong*, F. Jin, S.W. Li, L. Yuan, D. Feng, J.M. Shi*, J.L. Li. Microstructure evolution and mechanical properties of diffusion bonding Al5(TiZrHfNb)95 refractory high entropy alloy to Ti2AlNb alloy. Materials Science and Engineering: A, 2021(802): 140610.
4. Y. Peng, J.L. Li, J.M. Shi*, S.W. Li, J.T. Xiong. Microstructure and mechanical properties of diffusion bonded joints of high-entropy alloy Al5(HfNbTiZr)95 and TC4 titanium alloy. Journal of Materials Research and Technology, 2021, 11: 1741-1752.
5. Q. Wang, J.M. Shi*, L.X. Zhang, J.T. Xiong, J.L. Li, N. Ma, J.C. Feng. Additive manufacturing of a high-strength ZrC-SiC and TC4 gradient structure based on a combination of laser deposition technique and brazing. Journal of Materiomics,2021, 7: 966-779.
6. S.W. Li, J.L. Li, J.M. Shi*, Y.J. Du, Y. Peng, F. Jin, J.T. Xiong*, F.S. Zhang. Microstructure and mechanical properties of the brazed region in the AlCoCrFeNi high-entropy alloy and FGH98 superalloy joint. Materials Science and Engineering: A, 2021, 804: 140714.
7. L. Yuan, J. Ren, J.T. Xiong*, W. Zhao, J.M. Shi*, J.L. Li. Transient liquid phase bonding of Ni3Al based superalloy using Mn–Ni–Cr filler. Journal of Materials Research and Technology, 2021(11): 1583-1593.
8. W.Q. Song, J. Ren, P. He*, J.R. Sun, J.M. Shi*, J.T. Xiong*, J.L. Li. Quantitative determination of the defects in TC4 diffusion bonded joints via ultrasonic C-scan. Journal of Manufacturing Processes, 2021, 64:1476-1483.
9. Y. Peng, J.L. Li, J.M. Shi*, S.W. Li, J.T. Xiong. Microstructure and mechanical properties of Al2O3 ceramic and Ti2AlNb alloy joints brazed with Al2O3 particles reinforced Ag–Cu filler metal. Vacuum, 2021, 192: 110430.
2014-2020年：
1. J.M. Shi, J.C. Feng*, X.Y. Tian, H. Liu, L.X. Zhang*. Interfacial microstructure and mechanical property of ZrC-SiC ceramic and Ti6Al4V joint brazed with AgCuTi alloy. Journal of the European Ceramic Society, 2017, 37: 2769–2778.
2. J.M. Shi, J.C. Feng*, H. Liu, X.Y. Tian, L.X. Zhang*. Vacuum brazing of the Gr/2024Al composite and TC4 alloy using AgCuTi filler alloy with Ni-Al interlayer as auxiliary heat source. Journal of Alloys and Compounds, 2017, 694: 672-681.
3. J.M. Shi, L.X. Zhang*, X.Y. Pan, X.Y. Tian, J.C. Feng. Microstructure evolution and mechanical property of ZrC-SiC/Ti6Al4V joints brazed using Ti-15Cu-15Ni filler. Journal of the European Ceramic Society, 2018, 38:1237-1245.
4. J.M. Shi, L.X. Zhang*, Q. Chang, Z. Sun, J.C. Feng. Strengthening the ZrC-SiC ceramic and TC4 alloy brazed joint using laser additive manufactured functionally graded material layers. Ceramics International, 2018, 44: 11060-11069.
5. J.M. Shi, N. Ma*, L.X. Zhang*, J.C. Feng. Residual stress and fracture strength of brazed joint of ceramic and titanium alloy with the aid of laser deposited functionally graded material layers. Journal of Manufacturing Process, 2018, 34: 495-502.
6. J.M. Shi, L.X. Zhang*, H. Liu, Z. Sun, J. C. Feng. Vacuum brazing of SiBCN ceramic and TC4 alloy using TiB2 reinforced AgTi composite filler. Vacuum, 2018, 156: 108-114.
7. J.M. Shi, L.X. Zhang*, X. Y. Tian, H. W. Li, J. C. Feng. Vacuum brazing of the Cf/C composite and Ni base superalloy using MBF 20 filler. Vacuum, 2018, 156: 427-433.
8. J.M. Shi, L.X. Zhang*, Q. Chang, Z. Sun, J.C. Feng, N. Ma. Improving the strength of the ZrC-SiC and TC4 brazed joint through fabricating graded double-layered composite structure on TC4 surface. Metallurgical and Materials Transactions B, 2018, 49B: 902-911.
9. J.M. Shi, L.X. Zhang*, H. Liu, Z. Sun, J.C. Feng. Reliable brazing of SiBCN ceramic and TC4 alloy using AgCuTi filler with the assist of laser melting deposited FGM layers. Journal of Materials Science, 2019, 54: 2766-2778.
10. J.M. Shi*, Q. Wang*, J.L. Li, J.T. Xiong, L.X. Zhang, J.C. Feng. Interfacial microstructure and mechanical property of ZrC-SiC ceramic and TiAl joint brazed with AgZr active filler metal. Materials Characterization, 2019, 156: 109850.
11. J.M. Shi*, Q. Wang*, X.Y. Tian, J.T. Xiong, J.L. Li, L.X. Zhang, J.C. Feng. Brazing of Gr/2024Al composite and TC4 using AgCuTi filler with the assist of Ti-Al-C-Cu interlayer. Journal of Manufacturing Processes, 2019, 47: 211-218.
12. J.M. Shi*, X. Peng, X.Y. Tian, J.T. Xiong*, J.L. Li, L.X. Zhang, J.C. Feng. Design of Gr/2024Al composite and Ti6Al4V titanium alloy joint brazed using AgCuSnTi filler and Ni/Nb/Ni composite interlayers. Journal of Manufacturing Processes, 2020, 58: 67-74.
13. Q. Wang, J.M. Shi*, L.X. Zhang, S. Tsutsumi, J.C. Feng, N. Ma*. Impacts of laser cladding residual stress and material properties of functionally graded layers on titanium alloy sheet. Additive Manufacturing, 2020, 35: 101303.
14. J.T. Xiong, J.R. Sun, J.C. Wang, H. Zhang, J.M. Shi*, J.L. Li. Evaluation of the bonded ratio of TC4 diffusion bonded joints based on ultrasonic C-scan. Journal of Manufacturing Processes, 2019, 47: 238-243.
15. Y. Peng, J.L. Li*, X. Peng, S.W. Li, J.T. Xiong, J.M. Shi*. Interfacial microstructure evolution and formation process of the joints prepared by diffusion bonding on DD6 nickel-based single crystal superalloy. Journal of Materials Research and Technology, 2020(9): 16317-16328.
16. L.X. Zhang*, J.M. Shi, H.W. Li, X.Y. Tian, J.C. Feng. Interfacial microstructure and mechanical properties of ZrB2-SiC-C ceramic and GH99 superalloy joints brazed with a Ti-modified FeCoNiCrCu high-entropy alloy. Materials and Design, 2016, 97: 230–238.
17. 石俊秒，张丽霞，李宏伟，田晓羽，冯吉才. Ag-Cu-Sn-Ti活性钎焊Gr/2024Al复合材料与TC4钛合金. 焊接学报, 2014, 35:31-38.
2. 申请专利
(1) 石俊秒; 袁琳; 宋文清; 赵伟; 杜亚杰; 熊江涛; 李京龙 ; 分段式扩散焊接方法、其应用和航空发动机空心叶片, 2020-12-18, 中国, ZL201911082774.2
(2) 石俊秒; 彭萱; 孙现军; 李世伟; 熊江涛; 李京龙 ; 铌—铌硅金属间化合物复合材料、其制备方法及扩散焊模具, 2020-11-6, 中国, ZL202011232147.5
(3) 石俊秒; 彭萱; 李世伟; 孙现军; 熊江涛; 李京龙 ; 扩散焊接的方法和焊接产品, 2020-9-17, 中国,ZL202010978544.0
(4) 石俊秒; 张浩楠; 陈丹; 李京龙; 熊江涛; 彭萱 ; 一种回填式搅拌摩擦点焊工具和回填式搅拌摩擦点焊系统, 2020-6-30, 中国, ZL202021260264.8